This shop has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone. #SienteGlade #CollectiveBias
When we moved into our house, we only had two children with one on the way. We had a lot of plans for what we wanted to do to the house to make it our home. However, in just five short years, we’ve gone from three children to five! With our family growing, all of our house plans got put on the back burner. One of the plans we had was to update our downstairs laundry room/bathroom. It’s a nice, large space but because it’s the main bathroom that the kids use it’s been hard to keep it fresh and clean for guests too. Having Glade® Clean Linen® Wax Melts gives our laundry room/bathroom such a fresh and pure scent that isn’t overwhelming.
Another thing we wanted to do was build a fold down laundry table to make the space more usable. With 3 of the 5 kids being downstairs, I wanted a place where I could fold and hang clothes without having to take them upstairs just to bring them back downstairs to put them away. I had been using a 6 ft folding table, and while I loved the space it gave me for folding it took up a lot of room and was a pain to take down and put up.
Here is a look at the space that we had next to the dryer.
There used to be a big, weird cabinet there that we hated, so it was one of the first things we took out. As you can see, we need to paint badly! We definitely plan on doing that as soon as we can agree on a color!
Alright, so let’s get into this project. Here is a list of what you will need to make a DIY Drop Down Laundry Table like ours…
1 – 3/4″ 2′ x 4′ MDF sheet
2 – 8 ft 2″ x 4″ boards
4 – 3″ screws
5 – door hinges w/screws
Paint and brushes
First you are going to want to decide where on your wall you want your table and how high off the ground you want it. I chose to have my table so it’s about 35″ high. Cut one of the 2″ x 4″ boards into two, 4 ft halves. Mount the board to the studs in your wall. Use a level to make sure your board is straight.
Next attach three of your door hinges to the 2′ x 4′ MDF sheet. After that, you’ll mount the other side of the hinges to the 2″ x 4″ board attached to the wall.
Now cut the other 2″ x 4″ to the length you need for the height of your table. For mine, we had to cut two 35 1/4″ lengths. Attach your last two hinges to the table legs.
Attach the other side of the hinges on your legs to the underside of the table. You are going to want to offset them, one lower on the table then the other so when they fold against the underside of the table, it will lay flat against the wall.
Now that your table is all set up, you can paint and cover with your fabric. You can definitely paint before you put everything together, but I wanted to make sure that everything went together how I wanted before I painted.
When you cover with your fabric, make sure you have at least a 3 inch overhang on your fabric. You are going to want to make sure that you have enough fabric to pull it tight and staple it to the underside of the table top. Lay your fabric out on the table so you can see where you need to cut out for the hinges. Once you have those cut out, start at one corner of the table, fold the fabric and staple it. Move to the corner diagonal from the first and fold and staple the fabric there. Make sure as you continue stapling your fabric that the top remains smooth and tight.
When you are finished painting and covering with fabric, you are all done and your table is ready to use! I love how it folds down so easily making the room feel so much bigger!
I’m so excited to continue with our bathroom/laundry room makeover! I loved being inspired by the fresh scent of Glade® Clean Linen® Wax Melts to make this room a great space for our family and our guests.